• Lubrication-Pump-DDB10
  • Lubrication-Pump-DDB10 - Multi-Point Pump
  • Lubrication-Pump-DDB10-Grease-Injection-Pump

DDB-10 Multi Point Lubrication Pump

Item #: 3077
Maks. Tekanan Kerja: : 100Bar
Motor Listrik: 380VAC, 0.37kW, 50 / 60Hz
Grease Tank: 7L
bobot: 38Kgs
Dianggo: Multi-Point lubrication pump nganti 10 grease feed ports
fitur:
- 1 ~ 10 Lubrication ports kasedhiya
- Grease tank nganti 7L, 0.37Kw, 380V motor listrik
- Dimensi instalasi standar lan urip layanan maneh
Produk / Penggantian Related: Pump Injector
DDB Pump Technical Data: DDB Pump PDF

  • Description
  • dimensi

Description

Lubrication Pump DDB-10

Pompa Lubrication DDB-10 yaiku pompa injeksi pelumas multi-titik karo port 10 minyak pangan, sing kasedhiya kanggo sistem lubrication grease sing cilik, peralatan tunggal utawa progresif. Konstruksi pompa lubrication yaiku injeksi piston karo 10 grease port (utawa kurang, bisa dimeteraikan yen sawetara port ora perlu ing wektu kasebut), pompa pelumasan iki biasane disambungake karo pembagi tipe blok kanggo nyakup maneka syarat pelumasan.

Instalasi pompa pelumasan DDB-10 cukup gampang, mung nyambungake saben injector pump karo pipa baja utawa plastik karo konektor, banjur dispensing saben pelabuhan pakan lemak kanggo poin-poin pelumasan sing beda-beda, pojok transportasi minyak bakal diperbaiki rivet atau tali. Pompa DDB-10 kasedhiya kanggo medium penetrasi ora kurang saka 265 (25, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #), suhu sing dianjurake kanggo operasi sekitar luwih apik antarane 0 ~ 40.

It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.

Description of grease lubrication pump:

Konstruksi Grease-Lubrication-Pump-DDB18
Lubrication Pump Part List:

1. Motor listrik; 2. Cacing jero; 3. Gear cacing gear; 4-5-6. Gears; 7. Gagang eccentric; 8. Sambungan Pin; 9. Disk drive; 10.Inner piston; 11. Grase driven plate; 12. Grease stirring rod


Lubrication Pump DDB-10 Technical Data:

Maks. TekananFeeding PoinPiston StrokeStroke AdjustableFeeding Volume
10Mpa1010mm5mm0-0.2 ml / wektu
Panganan WektuTank VolumeMotorbobot
13 wektu / menit7L0.37Kw, 1380r / min, 380V38Kgs 1232


Lubrication Pump DDB-10 Ukuran:

Lubrication-Pump-DDB-10-dimensions

Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
Lubrication Pump DDB-10 Ukuran:Lubrication-Pump-DDB-10-dimensions
kesalahan:
GTranslate Your license is inactive or expired, please subscribe again!